DTSD1352-4S Base Station AC Multi Circuit Energy Meter

● Rated Current: AC250A, 100A

● Rated Voltage: 3x220V/380V AC (3P4W)

● Measure up to 4 circuit 3 phase

● Measure all electric parameters

● RS485 interface Modbus-RTU communication

● LCD Display; 35mm DIN Rail Installation
● Work with RJ45 port External Split core CTs

+86 18761509710

esty.chen@email.acrel.cn

8618761509710

DTSD1352-4S Base Station AC Multi Circuit Energy Meter

402 DTSD1352-4S DIN-rail Type Multi-circuit Power Meter V1.5.pdf

description1

Zipper closure 1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout

product detail

General

DTSD1352-4S series DIN-rail type multi-circuit power meter is mainly used for the full electric parameter measurement of multiple circuits, and can be connected to the current input of 4 three-phase circuits or 12 single-phase circuits at the same time. It can measure parameters such as voltage and current, power, power factor, phase angle, unbalance, and harmonics.

Front Panel

LCD Display

Dimension

Wiring

Typical Connection

PARAMETER

Auxiliary Power		AC/DC 85～265V; power consumption≤10VA;
Input Signal	Frequency	45～65Hz;
	Voltage	Rated value: AC 3×220V/380V;
		Overload: 1.2 times rated value (continuous); 2 times rated value/1 second;
		Power consumption: ≤ 0.5VA (each channel);
	Current	Rated value: Secondary input rated current: 50mA
		Overload: 1.2 times rated value (continuous); 10 times rated value/1 second;
		Power consumption: ≤ 0.5VA (each channel)
Measurement Accuracy		Frequency: 0.05Hz, voltage and current: Class 0.5 active energy: Class 1, reactive energy: Class 2; 2nd to 31st harmonic accuracy: ±1%;
Function	Pulse output	Output method: optocoupler pulse with open collector, the pulse constant defaults to 400imp/kWh (and active open input can only be either-or.);
	communication	RS485 interface, Modbus-RTU protocol; baud rate 1200～38400;
	Switch Input	2 channel or 4 channel passive dry contact input, built-in power supply; 2 channel active wet node input (AC220V), identify the oil generator and mains access (and pulse output can only be either-or.);
	Switch Output	Output method: relay normally open contact output; Contact rating: AC 250V/3A DC 30V/3A；

CONTACT US

Inquiry