Jiangsu Acrel Electrical Manufacturing Co., LTD.
tel:
+86 18761509710
email:
besty.chen@email.acrel.cn

Home > Shop > Isolated Power Distribution > Medical IT Isolated Power System > AITR Series Isolating Transformer

AITR Series Isolating Transformer

● Isolating transformers for medical IT systems

● Double insulation treatment, Electrostatic shielding layer

● PT100 temperature sensor

● Rated power: 3.15…10KVA

● CE

+86 18761509710

esty.chen@email.acrel.cn

8618761509710

AITR Series Isolating Transformer

AITR.pdf

description1

Zipper closure 1/5 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout

product detail

General

AITR series isolation transformer is specially used in medical IT system, and the core superposition adopts the silicon steel sheet imported from Japan, which has very small losses. The windings are treated with double insulation and have electrostatic shielding layer, which reduces electromagnetic interference between windings. The PT100 temperature sensor is installed in the wire bag to monitor the temperature of transformer. The whole body is treated with vacuum invasion paint, which increases mechanical strength and corrosion resistance. The product has good temperature rise performance and very low noise.

Product Selection

Dimension

Fig1 External dimensions of AITR series medical isolation transformer

Type	Capacity (VA)	A(mm)	B(mm)	C(mm)	D(mm)	E(mm)	F(mm)	Totalweight (kg) (mm) (mm) (kg)
AITR10000	10000	280	275	427	240	190	φ11	92
AITR8000	8000	280	265	427	240	190	φ11	90
AITR6300	6300	280	255	427	240	175	φ11	75
AITR5000	5000	280	255	427	240	175	φ11	73
AITR3150	3150	280	225	427	240	175	φ11	53

Installation & Wiring

Note:

1) The S terminal wiring can select 2×4mm² yellow-green wire. The wiring of two ST terminals can select 2×1.5mm² shielded twisted pairs, and the wiring should not be too long.

2) The connection line diameter of the input and output of the isolation transformer should match the rated current of the isolation transformer, or it can be selected according to the following table:

Isolation transformer type	Selected linediameter
AITR3150	3×4mm²
AITR5000/AITR6300	3×6mm²
AITR8000/AITR10000	3×10mm²

Typical Connection

PARAMETER

Rated Capacity	3.15kVA/5kVA/6.3kVA/8kVA/10kVA
Frequency	50/60Hz
Rated input voltage	230V
The output voltage	230V/115V
Inrush current(IE)	<12In
Leakage Current	<200uA
No-load output voltage(U_O)	<235V
No-load output current(I_O)	<3% In
Short-circuit voltage	<3% Un
Efficiency	>96%
Maximum ambient temperature	<40℃
No-load temperature rise	<33℃
Full load temperature rise	<76℃
Withstand voltage	4200V/Min
Insulation Class	H
Noise Level	<40dB (A)

ISOLATION POWER CABINET

CONTACT US

Inquiry